Úvod
>>
FOTO
>>
OBJEKTÍVY
>>
Metabones adaptéry
>>
Metabones Canon EF Lens to BMPCC Speed Booster

Doprava zdarma
od 100€

Overený obchod
sme tu pre teba

Snažíme sa
o najlepšie ceny

Metabones Canon EF Lens to BMPCC Speed Booster

Obj. čislo: MB_SPEF-BMPCC-BM1
Výrobca: Metabones

Adaptér Canon EF na BMPCC Speed BoosterTM je určený výhradne pre kameru Blackmagic Pocket Cinema Camera (BMPCC). Všimnite si, že tento nový 0.58x Speed Booster sa dá pripojiť len k BMPCC kamerám, vybaveným bajonetom Micro-4/3. Nemôžu byť pripojené na štandardné Micro 4/3 fotoaparáty (Panasonic GH4, GH3, GH2 a GH1).

764 €

18 909 Kč

bez DPH: 636,67 €

bez DPH: 15 757,50 Kč

Popis
Špecifikácia

Nový 0.58x Speed Booster znižuje faktor plodín na BMPCC z 3.02x na 1.75x a produkuje najväčšiu svetelnosť optiky v súčasnej dobe k dispozícii, s maximálnym výstupným svetelnosťou f / 0,74.

METABONES CANON EF LENS / BMPCC SPEED BOOSTER

Nový 0.58x Speed Booster znižuje faktor na BMPCC z 3.02x na 1.75x a produkuje najväčšiu svetelnosť optiky v súčasnej dobe k dispozícii, s maximálnou výstupnou svetelnosťou f / 0,74 !

Here are a few examples:

Master Lens	with Speed Booster 0.58x	35mm equivalent focal length on BMPCC *
Canon 85mm f/1.2	49.3mm f/0.74	148.9mm	extremely fast tele
Sigma 18-35mm f/1.8	10.5-20.3mm f/1.0	30.7-61.3mm	super fast and stunningly sharp zoom
Sigma 8-16mm f/4.5-5.6	4.6-9.3mm f/2.6-3.2	14-27.8mm	super wide zoom
Sigma 30mm f/1.4 Art	19.3mm f/0.81	58.3mm	super fast and sharp standard lens
Tokina 11-16mm f/2.8	6.4-9.3mm f/1.6	19.3-27.8mm	very fast and sharp wide-angle zoom
*) Based on diagonal field of view

Table of compatibility and resulting crop factors with different SpeedBooster^TM:

Supported

Not supported

EF lenses

Image stabilization (IS) lenses

Electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L)

EXIF (focal length, aperture, zoom range)

Distance and zoom display on BMPCC camcorders (see note 1)

Contax N mount lenses modified to Canon EF by Conurus (see note 2)

Contax 645 NAM-1 adapter modified to Canon EF by Conurus (see note 2)

Sigma, Tamron and Tokina lenses in Canon EF mount (see note 2)

Autofocus

EF-S lenses

GH4

Lens correction such as peripheral shading, CA and distortion

Focus confirmation "chip" (e.g. Dandelion)

M42 screw mount adapters (see note 5)

Stacking non-Metabones/non-Conurus mount adapters on top (see note 6 and list of lenses which require modification below.)

Note:

Requires lenses supporting distance information.
A third party zoom lens may need to be registered with the Speed Booster/Smart Adapter first in order to detect its maximum aperture.
This Speed Booster is designed to cover an BMPCC image circle which is not big enough to cover a full-size 36mm x 24mm sensor.
For use with fast lenses (faster than f/1.8), the pre-boost apertures will be displayed in the camera.

Slow lenses will report boosted apertures to the camera body but fast lenses will report pre-boost apertures. We won't show f/0.7 with a f/1.2 lens attached, but show f/1.2 instead.

Example:

a) EF 85/1.2L attached, camera display = f/1.2, physical aperture (lens + Speed Booster combined) = f/0.74.
b) Sigma 18-35/1.8 attached, camera display = f/1.0, physical aperture (lens + Speed Booster combined) = f/1.0.
Some improperly-made M42 screw mount adapters may short the electronic contacts of the Speed Booster and cause damage to the Speed Booster and/or camera body.
Many manual focus lenses (e.g. OM 28/2.8, OM 50/1.8, Leica R 15/3.5) have rear protrusions (spikes, levers, other appendages) which would damage the optics and/or housing of Speed Booster^TMThey need to be modified before they can be safely used on Speed Booster^TM Check and make sure there are no rear protrusions from the adapter/lens combination before using on Speed Booster. Scratches and damages caused by rear protrusions on Speed Booster^TM are not covered by warranty.
This Speed Booster is NOT fully compatible with GH4 or other MFT camera. This is use only with BMPCC. When Speed Booster® is used with other MFT camera, it may cause damage on the camera.

List of lenses (have been tested by metabones) with support on EF-BMPCC Speed Booster. (Lenses which have been tested with EF-E Speed Booster may refer to EF-E Speed Booster product page.)

Canon EF zooms

Canon 20-35mm3.5-4.5

Canon 28-80mm2.8-4L

Canon 70-200mm2.8L

Canon 24-70mm2.8_II

Canon 24-105mm4_L

Canon 70-200mm4_L

Canon 70-300mm4-5.6L

Canon 70-300mm4-5.6

Canon EF primes

Canon 50mm1.8

Canon 50mm1.4

Canon 85mm 1.2

Canon 100mm 2.8

Others

Sigma 18-200mm3.5-6.3

Zeiss 35mm2

List of manual focus lenses which REQUIRE MODIFICATION to be used on Speed Booster

Many manual focus lenses have rear protrusions (spikes, levers, other appendages) which would damage the optics and/or housing of Speed Booster^TM They need to be modified before they can be safely used on Speed Booster^TMCheck and make sure there are no rear protrusions from the adapter/lens combination before using on Speed Booster. Scratches and damages caused by rear protrusions or by poor quality adapters are not covered by warranty. The following is an incomplete list of lenses known to be incompatible.

Leica R

Super-Elmar-R 15mm

Elmarit R 28/2.8

Elmarit R 35/2.8

Summicron R 50/2

Nikon F

20/2.8 AI-S

Olympus OM

OM 18/3.5

OM 21/2

OM 21/3.5

OM 28/2.8

OM 50/1.8

Pentax K

Every Pentax K-mount lens has a protruding fin and an aperture lever. It does NOT fit.

Disclaimer: we are NOT licensed, approved or endorsed by Micro Four Thirds or Canon.

Why Metabones®?

Since its inception, Metabones has been designing and manufacturing lens adapters recognized among professionals and enthusiasts as leaders in design and workmanship.

Contrary to the popular trend of other factories using an aluminum ring painted black on the camera-body-side, we instead take no short-cut but use precision-machined brass with chromium plating on both the camera-body and the lens sides of our adapters, in order to ensure smooth mounting, great appearance, and durability. The lens side of the adapter features a strong leaf-spring structure, strengthening the adapter-lens connection and ensuring tightness of the lens in order to reduce wear and prevent focus errors and optical alignment issues from appearing.

Metabones uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens.

All Metabones Adapters follow this tradition of uncompromising precision, robust build quality and outstanding finish. Our new Smart Adapter^TM series of products add industry-leading electronic interfacing technology from Canada, with true electronic control of the lens' aperture directly from the camera body.

Features

Both camera-side and lens-side of the adapter are made of brass, precision-machined and plated with chromium.
Satin surface finish - just like your OEM lens and camera mounts.
Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens.
Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements.

Our Smart Adapter^TM series adapters have the following additional features

True electronic integration of aperture diaphragm - let camera automatically choose aperture in P or S exposure modes, or dial in yourself on the camera body in A or M modes.
EXIF data such as lens identification, focal length and aperture.